Nickel

Technical information, including mechanical and electrical properties, material specifications, and thermal coefficient and conductivity data are provided in the tabs above. No one offers a broader range of metals and alloys than HPM. Contact your HPM technical support representative with any questions.

Technical Data
TYPE HPM
Nickel
200
HPM
Nickel
201
HPM
Nickel
270
HPM
400

HPM
600

HPM
X-750

Precision
C

HPM
Ni 36

Moly
Perm-
Alloy
Rodar

HPM
Ni 42

HPM
Ni 52

HPM
80/20 A

HPM
80/20 Al

Ni 99.5 99.5 99.97 66.0 BAL 73.0 42.0 36.0 80.0 29.0 41.0 50.5 BAL BAL
C .06 .01 .02 .12 .04 .02 .12 .05 .02 .30
Mn .25 .20 .90 .40 .70 .40 .35 .50 .30 .40 .40
Fe .15 .15 1.35 8.5 6.75 48.5 63.2 16.3 53.5 BAL BAL .50 .20
Si .05 .05 .15 .30 .50 .30 .35 .20 .20 1.25
Cu .05 .05 31.5 .05 .05
others Cr 15.5


Cr 15.0
Al .80
Ti 2.50
Cb .85
Cr 5.4
Al .7
Ti 2.4
Mo 4.8


Co 17.0


Cr 19.5


Cr 19.5


Density LB/CU IN .321 .321 .321 .319 .306 .298 .293 .291 .315 .302 .293 .300 .304 .304
Thermal
Expansion
Coefficient X
10-6/° C
13.3 13.3 13.3 13.9 14.2 12.6 10.1 1.05 12.7 4.9 6.0 10.0 13.4 13.4
Thermal
Conductivity
W/M x K @ 100° C
67 74 79 22 15 12 13 10.5 35 17 11 14 15 15
Electrical
Resistivity
MICROHM - CM
9.5 8.5 7.5 51 103 119 102 82 59 49 70 43 108 108
Mechanical Properties
TYPICAL MECHANICAL PROPERTIES
TYPE Condition Tensile PSI Yield 0.2% Offset PSI Elongation % IN 2 *
HPM Nickel 200
Annealed 67,000 20,000 47
HPM Nickel 201 Annealed 67,000 20,000 47
HPM Nickel 270 Annealed 65,000 20,000 47
HPM 400 Annealed 75,000 30,000 30
HPM 600 Annealed 90,000 40,000 45
Cold Rolled 170,000 160,000 2
HPM X-750 Annealed 140,000 65,000 40
Precision C Cold Rolled 130,000 120,000 6.5
CR and Aged 200,000 180,000 7.0
HPM Ni 36 Annealed 70,000 40,000 35
Cold Rolled 130,000 125,000 2
Moly Permalloy Annealed 90,000 75,000 30
Cold Rolled 160,000 150,000 1
Rodar Annealed 75,000 50,000 30
HPM Ni 42 Annealed 72,000 40,000 35
Cold Rolled 110,000 105,000 5
HPM Ni 52 Annealed 75,000 30,000 30
Cold Rolled 130,000 125,000 1
HPM 80/20 A Annealed 105,000 50,000 35
HPM 80/20 Al Annealed 105,000 50,000 35
Cold Rolled 190,000 185,000 1

* These values may be adjusted by control of process variable - consult HPM for desired values.